NoahParameters
Scheme constants of WRF's unified Noah land-surface model, transcribed from the module- and subroutine-level PARAMETER statements and the GENPARM.TBL scalars of phys/module_sf_noahlsm.F (WRF 4.8, sf_surface_physics = 2). Mounted by every Noah component as subsystem `par` so that no tuning constant is written inline in the physics. Two groups: (a) the thermodynamic constants Noah redefines for itself, which do NOT agree with lib/wrf_constants.esm and must not be taken from there -- Noah's rd = 287.04 against the dynamics' 287.0, Noah's sigma = 5.67e-8 against the dynamics' 5.67051e-8, and, inside SUBROUTINE PENMAN alone, cp = 1004.6 against the cp = 1004.5 that module_model_constants supplies to the rest of the module (FORTRAN_BUGS N88); and (b) the GENPARM.TBL scalars that REDPRM copies into the scheme, whose values are those WRF loaded for the reference runs and are carried in the `*_data` fields of the `noah` dump. Volumetric heat capacities (cair_vol, cice_vol, ch2o_vol) are the SUBROUTINE HRT literals, not the mass-specific cph2o/cpice of the module header; both appear in the scheme and they are different quantities. Group (a) carries the nominal decimal values of the Fortran PARAMETER statements: a real64 kernel build evaluates those literals in double precision, so the nominal value is what a reference replay uses. Group (b) is DIFFERENT -- those numbers reach the scheme through a real32 table array, so the value the scheme uses, and that a real64 replay reproduces, is the SINGLE-PRECISION representation of the table's decimal text. Five of them are not exactly representable and their defaults are therefore the widened singles (cmcmax, salp, refdk, frzk, czil); using the decimal instead puts a 4.7e-8 relative error into cmcmax, which a canopy-wetness ratio near one amplifies into a 1.5e-5 error in the transpiration.
Description
Scheme constants of WRF’s unified Noah land-surface model, transcribed from the module- and subroutine-level PARAMETER statements and the GENPARM.TBL scalars of phys/module_sf_noahlsm.F (WRF 4.8, sf_surface_physics = 2). Mounted by every Noah component as subsystem par so that no tuning constant is written inline in the physics. Two groups: (a) the thermodynamic constants Noah redefines for itself, which do NOT agree with lib/wrf_constants.esm and must not be taken from there – Noah’s rd = 287.04 against the dynamics’ 287.0, Noah’s sigma = 5.67e-8 against the dynamics’ 5.67051e-8, and, inside SUBROUTINE PENMAN alone, cp = 1004.6 against the cp = 1004.5 that module_model_constants supplies to the rest of the module (FORTRAN_BUGS N88); and (b) the GENPARM.TBL scalars that REDPRM copies into the scheme, whose values are those WRF loaded for the reference runs and are carried in the *_data fields of the noah dump. Volumetric heat capacities (cair_vol, cice_vol, ch2o_vol) are the SUBROUTINE HRT literals, not the mass-specific cph2o/cpice of the module header; both appear in the scheme and they are different quantities. Group (a) carries the nominal decimal values of the Fortran PARAMETER statements: a real64 kernel build evaluates those literals in double precision, so the nominal value is what a reference replay uses. Group (b) is DIFFERENT – those numbers reach the scheme through a real32 table array, so the value the scheme uses, and that a real64 replay reproduces, is the SINGLE-PRECISION representation of the table’s decimal text. Five of them are not exactly representable and their defaults are therefore the widened singles (cmcmax, salp, refdk, frzk, czil); using the decimal instead puts a 4.7e-8 relative error into cmcmax, which a canopy-wetness ratio near one amplifies into a 1.5e-5 error in the transpiration.
Reference
- Chen, F., and J. Dudhia (2001). Coupling an advanced land surface-hydrology model with the Penn State-NCAR MM5 modeling system. Part I: Model implementation and sensitivity. Mon. Wea. Rev., 129, 569-585.
- Ek, M. B., et al. (2003). Implementation of Noah land surface model advances in the NCEP operational mesoscale Eta model. J. Geophys. Res., 108(D22), 8851.
- wrf-model/WRF v4.8.0 phys/module_sf_noahlsm.F lines 24-27 (module PARAMETERs), 375-377 (SFLX), 2221-2222 (PENMAN), 1616-1617 (HRT), and the GENPARM.TBL scalars copied by SUBROUTINE REDPRM lines 2440-2535.
Parameters
| Name | Units | Default | Description |
|---|---|---|---|
rd | J/(kg*K) | 287.04 | Gas constant for dry air as Noah defines it (module PARAMETER RD, and the SFLX-local R). Deliberately NOT wrf.r_d = 287.0: the two differ by 1.4e-4 relative and both appear in the same WRF executable (FORTRAN_BUGS N88). |
sigma | W/(m^2*K^4) | 5.67e-08 | Stefan-Boltzmann constant as Noah defines it (module PARAMETER SIGMA). Deliberately NOT wrf.stbolt = 5.67051e-8; the two differ by 9e-5 relative (FORTRAN_BUGS N88). |
cp_penman | J/(kg*K) | 1004.6 | Specific heat of dry air at constant pressure as SUBROUTINE PENMAN alone defines it (its local PARAMETER CP = 1004.6). Every other routine in the module uses the cp = 1004.5 imported from module_model_constants, so a single Noah call evaluates two different cp (FORTRAN_BUGS N88). Only the Penman component reads this one. |
cph2o | J/(kg*K) | 4218.0 | Specific heat of liquid water, module PARAMETER CPH2O, used for the sensible-heat content of falling rain in PENMAN and for FLX1. |
cpice | J/(kg*K) | 2106.0 | Specific heat of ice, module PARAMETER CPICE, used for the sensible-heat content of falling snow in PENMAN. |
lsubf | J/kg | 333500.0 | Latent heat of fusion, module PARAMETER LSUBF, used for FLX2 when freezing rain reaches the ground. |
lvh2o | J/kg | 2501000.0 | Latent heat of vaporisation, SFLX PARAMETER LVH2O; converts the kinematic evaporation terms to W/m^2 at the end of SFLX. |
lsubs | J/kg | 2830000.0 | Latent heat of sublimation, SFLX PARAMETER LSUBS; weights the snow-covered fraction of the potential-evaporation conversion. |
elcp | K | 2488.8 | PENMAN’s PARAMETER ELCP = 2.4888e3, the latent heat of vaporisation divided by the specific heat of air (L/cp), used to express the vapour-pressure deficit as a temperature. It is L/cp, (J/kg)/(J/(kg K)) = K per unit specific humidity, so it carries K (declared J/kg until 2026-11-12, which the esm 2.1 validator rejected in delta and a); carried with PENMAN’s own value rather than rebuilt from lvh2o/cp_penman, which would give 2489.5. |
t0 | K | 273.15 | Freezing point used by the soil thermal routines (HRT/SNKSRC PARAMETER T0). Note it is 273.15, while the module’s phase-change routine FRH2O uses the same value but WRF’s microphysics uses 273.16. |
cair_vol | J/(m^3*K) | 1004.0 | Volumetric heat capacity of the soil air fraction, HRT PARAMETER CAIR. |
cice_vol | J/(m^3*K) | 2106000.0 | Volumetric heat capacity of soil ice, HRT PARAMETER CICE = 2.106e6. |
ch2o_vol | J/(m^3*K) | 4200000.0 | Volumetric heat capacity of soil water, HRT PARAMETER CH2O = 4.2e6. Not 4.218e6: the mass-specific cph2o of the module header and this volumetric literal disagree by 0.4 % about the same substance. |
topt | K | 298.0 | GENPARM.TBL TOPT_DATA, the optimum transpiration air temperature of the Jarvis temperature stress function. |
cmcmax | m | 0.0005000000237487257 | GENPARM.TBL CMCMAX_DATA, the maximum canopy water capacity. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table’s decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 5.E-4. |
cfactr | 1 | 0.5 | GENPARM.TBL CFACTR_DATA, the exponent of the canopy-wetness fraction in the canopy-evaporation and transpiration partition. |
rsmax | s/m | 5000.0 | GENPARM.TBL RSMAX_DATA, the maximum stomatal resistance, which sets the dark-limit floor rsmin/rsmax of the solar stress factor. |
sbeta | 1 | -2.0 | GENPARM.TBL SBETA_DATA, the exponent that reduces the surface soil thermal conductivity under a canopy, df1 = df1 exp(sbeta shdfac). |
fxexp | 1 | 2.0 | GENPARM.TBL FXEXP_DATA, the exponent of the bare-soil evaporation efficiency. |
csoil | J/(m^3*K) | 2000000.0 | GENPARM.TBL CSOIL_DATA, the volumetric heat capacity of the soil mineral fraction. |
salp | 1 | 2.5999999046325684 | GENPARM.TBL SALP_DATA, the shape parameter of the snow-cover fraction curve. Carried for completeness; the snow-free components do not read it. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table’s decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 2.6. |
zbot | m | -8.0 | GENPARM.TBL ZBOT_DATA, the depth at which the deep-soil temperature tbot is prescribed, in WRF’s sign convention (negative downward). |
refdk | m/s | 1.9999999949504854e-06 | GENPARM.TBL REFDK_DATA, the reference saturated hydraulic conductivity of the infiltration parameter kdt = refkdt dksat / refdk. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table’s decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 2.0E-6. |
refkdt | 1 | 3.0 | GENPARM.TBL REFKDT_DATA, the reference infiltration parameter. |
frzk | 1 | 0.15000000596046448 | GENPARM.TBL FRZK_DATA, the reference frozen-ground parameter, scaled per soil type into frzx. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table’s decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 0.15. |
czil | 1 | 0.10000000149011612 | GENPARM.TBL CZIL_DATA, the Zilitinkevich coefficient of the thermal roughness length. Read by the surface-exchange routine SFCDIF, which WRF bypasses when a separate surface-layer scheme supplies ch; carried for completeness. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table’s decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 0.1. |
lvcoef | 1 | 0.5 | GENPARM.TBL LVCOEF_DATA, the snow-albedo decay coefficient. Carried for completeness; the snow-free components do not read it. |
bare | 1 | 19.0 | VEGPARM.TBL BARE, the vegetation category REDPRM treats as bare soil (‘IF (VEGTYP .eq. BARE) SHDFAC = 0.0’, module_sf_noahlsm.F:2503). 19 (barren or sparsely vegetated) in the USGS table these components carry; the MODIS table names 16. |
rho_water_cgs | g/cm^3 | 1.0 | Density of liquid water in g/cm^3, the factor hidden in SFLX’s SNDENS = SNEQV/SNOWH: a water-equivalent depth over a physical depth is the bulk density relative to water, and CSNOW reads it as g/cm^3, so the ratio is multiplied by 1 g/cm^3. Not wrf.rhowater or rho_water: the runner computes with the numbers as written, and the value the Fortran uses here is 1 (added 2026-11-12 for the esm 2.1 validator). |
rho_water | kg/m^3 | 1000.0 | Density of liquid water as the frozen-soil routines define it (SNKSRC’s PARAMETER DH2O = 1.0000E3, FRH2O’s DH2O = 1000.0). Numerically equal to wrf.rhowater, written separately because the Fortran declares it separately. |
hlice | J/kg | 333500.0 | Latent heat of fusion as the frozen-soil routines define it (SNKSRC’s and FRH2O’s PARAMETER HLICE = 3.3350E5). Numerically equal to par.lsubf; the module declares the same constant twice under two names. |
snow_c1 | 1/(cm*h) | 0.01 | SNOWPACK’s C1, the fractional increase in snow density per centimetre of overlying water equivalent per hour, in Koren’s approximate solution of E. Anderson’s compaction equation (3.29), NOAA Technical Report NWS 19. WRF: SUBROUTINE SNOWPACK, PARAMETER C1 = 0.01. The routine works in its own ‘simulation units’ of centimetres and hours, and this constant carries them. |
snow_c2 | 1 | 21.0 | SNOWPACK’s C2, Kojima’s density coefficient in the compaction exponent exp(0.08 tavgc - c2 sndens). WRF: PARAMETER C2 = 21.0, and its comment calls it ‘a constant (cm3/g) Kojima estimated as 21 cms/g’. Declared dimensionless here because the density it multiplies is carried as the dimensionless fraction of the density of water (WRF’s own comment on SNDENS: ‘G/CM3=DIMENSIONLESS FRACTION OF H2O DENSITY’), which is numerically the density in g/cm^3; the product is dimensionless either way. |
snow_ctemp | 1/K | 0.08 | The temperature coefficient of the compaction exponent, WRF’s in-line 0.08 in EXP(0.08TAVGC - C2SNDENS). TAVGC is a Celsius temperature, i.e. a temperature measured from the freezing point, and a difference of one degree Celsius is a difference of one kelvin, so the coefficient is per kelvin. |
snow_dwrate | 1/day | 0.13 | SNOWPACK’s melt-water retention rate: 13 % of the liquid water can be stored in the pack per DAY during snowmelt, until the density reaches 0.40. WRF’s in-line 0.13 in DW = 0.13*DTHR/24. |
snow_dens_max | 1 | 0.4 | Upper limit SNOWPACK imposes on the snow density, as a fraction of the density of water. WRF applies it twice: to the compacted density DSX, and again to the density after melt-water retention. |
snow_dens_min | 1 | 0.05 | Lower limit SNOWPACK imposes on the compacted snow density, as a fraction of the density of water. WRF: IF (DSX < 0.05) DSX = 0.05. |
snow_esdc_min | cm | 0.01 | Floor SNOWPACK puts under the water equivalent BEFORE forming the compaction argument, WRF’s ESDCX: IF (ESDC > 1.E-2) THEN ESDCX = ESDC ELSE ESDCX = 1.E-2. It bounds the overburden a vanishing pack can feel, and it does NOT apply to the depth diagnostic at the end, which uses the unfloored ESDC. |
snow_new_dens | 1 | 0.05 | Density of freshly fallen snow at or below snow_new_tcold, as a fraction of the density of water. WRF: SUBROUTINE SNOW_NEW’s in-line 0.05, the constant term of Gottlib’s (1980) fresh-snow density fit. Numerically equal to snow_dens_min, the floor SNOWPACK puts under the COMPACTED density, but a different quantity: this one is where new snow starts, that one is where compaction may not take it. |
snow_new_coef | 1/K^1.5 | 0.0017 | Coefficient of Gottlib’s (1980) fresh-snow density fit, dsnew = snow_new_dens + snow_new_coef (tempc - snow_new_tcold)^1.5: warmer snow falls denser. WRF’s in-line 0.0017. Its units are fixed by the exponent, since the temperature excess it multiplies is raised to the 3/2 power and the result is a density fraction. |
snow_new_tcold | K | -15.0 | Temperature below which Gottlib’s fit is cut off and fresh snow takes its minimum density, measured from the freezing point (WRF’s -15. against TEMPC = TEMP - 273.15). Below it the fit’s 3/2 power would take the density below its floor and, for a negative argument, out of the reals. |
snow_new_hmin | cm | 0.001 | Depth below which SNOW_NEW abandons the depth-weighted density average and takes max(dsnew, sndens) instead, WRF’s 1.0E-3 in IF (SNOWHC + HNEWC .LT. 1.0E-3). It guards the average against a vanishing denominator when both the old pack and the new snowfall are negligible. |
snow_z0 | m | 0.001 | Aerodynamic roughness length of a snow surface, WRF’s PARAMETER Z0S in SUBROUTINE SNOWZ0. It is the roughness the snow-covered fraction contributes once the vegetation beneath is fully buried. |
snow_z0_burial_factor | 1 | 7.0 | How many roughness lengths of snow it takes to bury the vegetation, WRF’s 7.0 in BURIAL = 7.0 Z0BRD - SNOWH. Roughness elements are treated as 7 z0brd tall, so the snow-covered roughness falls linearly from z0brd towards the snow value as the pack approaches that height. |
snow_z0_burial_min | m | 0.0007 | Remaining exposed height below which SNOWZ0 stops interpolating and takes the bare snow roughness, WRF’s 0.0007 in IF (BURIAL.LE.0.0007). Divided by snow_z0_burial_factor it is 1e-4 m, a tenth of snow_z0, so the linear branch is abandoned well before it would undercut the snow surface’s own roughness. |
Raw .esm
Raw .esm JSON (this component)
{
"variables": {
"rd": {
"type": "parameter",
"units": "J/(kg*K)",
"default": 287.04,
"description": "Gas constant for dry air as Noah defines it (module PARAMETER RD, and the SFLX-local R). Deliberately NOT wrf.r_d = 287.0: the two differ by 1.4e-4 relative and both appear in the same WRF executable (FORTRAN_BUGS N88)."
},
"sigma": {
"type": "parameter",
"units": "W/(m^2*K^4)",
"default": 5.67e-08,
"description": "Stefan-Boltzmann constant as Noah defines it (module PARAMETER SIGMA). Deliberately NOT wrf.stbolt = 5.67051e-8; the two differ by 9e-5 relative (FORTRAN_BUGS N88)."
},
"cp_penman": {
"type": "parameter",
"units": "J/(kg*K)",
"default": 1004.6,
"description": "Specific heat of dry air at constant pressure as SUBROUTINE PENMAN alone defines it (its local PARAMETER CP = 1004.6). Every other routine in the module uses the cp = 1004.5 imported from module_model_constants, so a single Noah call evaluates two different cp (FORTRAN_BUGS N88). Only the Penman component reads this one."
},
"cph2o": {
"type": "parameter",
"units": "J/(kg*K)",
"default": 4218.0,
"description": "Specific heat of liquid water, module PARAMETER CPH2O, used for the sensible-heat content of falling rain in PENMAN and for FLX1."
},
"cpice": {
"type": "parameter",
"units": "J/(kg*K)",
"default": 2106.0,
"description": "Specific heat of ice, module PARAMETER CPICE, used for the sensible-heat content of falling snow in PENMAN."
},
"lsubf": {
"type": "parameter",
"units": "J/kg",
"default": 333500.0,
"description": "Latent heat of fusion, module PARAMETER LSUBF, used for FLX2 when freezing rain reaches the ground."
},
"lvh2o": {
"type": "parameter",
"units": "J/kg",
"default": 2501000.0,
"description": "Latent heat of vaporisation, SFLX PARAMETER LVH2O; converts the kinematic evaporation terms to W/m^2 at the end of SFLX."
},
"lsubs": {
"type": "parameter",
"units": "J/kg",
"default": 2830000.0,
"description": "Latent heat of sublimation, SFLX PARAMETER LSUBS; weights the snow-covered fraction of the potential-evaporation conversion."
},
"elcp": {
"type": "parameter",
"units": "K",
"default": 2488.8,
"description": "PENMAN's PARAMETER ELCP = 2.4888e3, the latent heat of vaporisation divided by the specific heat of air (L/cp), used to express the vapour-pressure deficit as a temperature. It is L/cp, (J/kg)/(J/(kg K)) = K per unit specific humidity, so it carries K (declared J/kg until 2026-11-12, which the esm 2.1 validator rejected in delta and a); carried with PENMAN's own value rather than rebuilt from lvh2o/cp_penman, which would give 2489.5."
},
"t0": {
"type": "parameter",
"units": "K",
"default": 273.15,
"description": "Freezing point used by the soil thermal routines (HRT/SNKSRC PARAMETER T0). Note it is 273.15, while the module's phase-change routine FRH2O uses the same value but WRF's microphysics uses 273.16."
},
"cair_vol": {
"type": "parameter",
"units": "J/(m^3*K)",
"default": 1004.0,
"description": "Volumetric heat capacity of the soil air fraction, HRT PARAMETER CAIR."
},
"cice_vol": {
"type": "parameter",
"units": "J/(m^3*K)",
"default": 2106000.0,
"description": "Volumetric heat capacity of soil ice, HRT PARAMETER CICE = 2.106e6."
},
"ch2o_vol": {
"type": "parameter",
"units": "J/(m^3*K)",
"default": 4200000.0,
"description": "Volumetric heat capacity of soil water, HRT PARAMETER CH2O = 4.2e6. Not 4.218e6: the mass-specific cph2o of the module header and this volumetric literal disagree by 0.4 % about the same substance."
},
"topt": {
"type": "parameter",
"units": "K",
"default": 298.0,
"description": "GENPARM.TBL TOPT_DATA, the optimum transpiration air temperature of the Jarvis temperature stress function."
},
"cmcmax": {
"type": "parameter",
"units": "m",
"default": 0.0005000000237487257,
"description": "GENPARM.TBL CMCMAX_DATA, the maximum canopy water capacity. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table's decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 5.E-4."
},
"cfactr": {
"type": "parameter",
"units": "1",
"default": 0.5,
"description": "GENPARM.TBL CFACTR_DATA, the exponent of the canopy-wetness fraction in the canopy-evaporation and transpiration partition."
},
"rsmax": {
"type": "parameter",
"units": "s/m",
"default": 5000.0,
"description": "GENPARM.TBL RSMAX_DATA, the maximum stomatal resistance, which sets the dark-limit floor rsmin/rsmax of the solar stress factor."
},
"sbeta": {
"type": "parameter",
"units": "1",
"default": -2.0,
"description": "GENPARM.TBL SBETA_DATA, the exponent that reduces the surface soil thermal conductivity under a canopy, df1 = df1 exp(sbeta shdfac)."
},
"fxexp": {
"type": "parameter",
"units": "1",
"default": 2.0,
"description": "GENPARM.TBL FXEXP_DATA, the exponent of the bare-soil evaporation efficiency."
},
"csoil": {
"type": "parameter",
"units": "J/(m^3*K)",
"default": 2000000.0,
"description": "GENPARM.TBL CSOIL_DATA, the volumetric heat capacity of the soil mineral fraction."
},
"salp": {
"type": "parameter",
"units": "1",
"default": 2.5999999046325684,
"description": "GENPARM.TBL SALP_DATA, the shape parameter of the snow-cover fraction curve. Carried for completeness; the snow-free components do not read it. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table's decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 2.6."
},
"zbot": {
"type": "parameter",
"units": "m",
"default": -8.0,
"description": "GENPARM.TBL ZBOT_DATA, the depth at which the deep-soil temperature tbot is prescribed, in WRF's sign convention (negative downward)."
},
"refdk": {
"type": "parameter",
"units": "m/s",
"default": 1.9999999949504854e-06,
"description": "GENPARM.TBL REFDK_DATA, the reference saturated hydraulic conductivity of the infiltration parameter kdt = refkdt dksat / refdk. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table's decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 2.0E-6."
},
"refkdt": {
"type": "parameter",
"units": "1",
"default": 3.0,
"description": "GENPARM.TBL REFKDT_DATA, the reference infiltration parameter."
},
"frzk": {
"type": "parameter",
"units": "1",
"default": 0.15000000596046448,
"description": "GENPARM.TBL FRZK_DATA, the reference frozen-ground parameter, scaled per soil type into frzx. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table's decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 0.15."
},
"czil": {
"type": "parameter",
"units": "1",
"default": 0.10000000149011612,
"description": "GENPARM.TBL CZIL_DATA, the Zilitinkevich coefficient of the thermal roughness length. Read by the surface-exchange routine SFCDIF, which WRF bypasses when a separate surface-layer scheme supplies ch; carried for completeness. TABLE VALUE: WRF reads GENPARM.TBL into a real32 array, so the number the scheme actually uses is the single-precision representation of the table's decimal text; the default here is that widened single, not the decimal, because it is what a real64 replay of WRF reproduces. The table text reads 0.1."
},
"lvcoef": {
"type": "parameter",
"units": "1",
"default": 0.5,
"description": "GENPARM.TBL LVCOEF_DATA, the snow-albedo decay coefficient. Carried for completeness; the snow-free components do not read it."
},
"bare": {
"type": "parameter",
"units": "1",
"default": 19.0,
"description": "VEGPARM.TBL BARE, the vegetation category REDPRM treats as bare soil ('IF (VEGTYP .eq. BARE) SHDFAC = 0.0', module_sf_noahlsm.F:2503). 19 (barren or sparsely vegetated) in the USGS table these components carry; the MODIS table names 16."
},
"rho_water_cgs": {
"type": "parameter",
"units": "g/cm^3",
"default": 1.0,
"description": "Density of liquid water in g/cm^3, the factor hidden in SFLX's SNDENS = SNEQV/SNOWH: a water-equivalent depth over a physical depth is the bulk density relative to water, and CSNOW reads it as g/cm^3, so the ratio is multiplied by 1 g/cm^3. Not wrf.rhowater or rho_water: the runner computes with the numbers as written, and the value the Fortran uses here is 1 (added 2026-11-12 for the esm 2.1 validator)."
},
"rho_water": {
"type": "parameter",
"units": "kg/m^3",
"default": 1000.0,
"description": "Density of liquid water as the frozen-soil routines define it (SNKSRC's PARAMETER DH2O = 1.0000E3, FRH2O's DH2O = 1000.0). Numerically equal to wrf.rhowater, written separately because the Fortran declares it separately."
},
"hlice": {
"type": "parameter",
"units": "J/kg",
"default": 333500.0,
"description": "Latent heat of fusion as the frozen-soil routines define it (SNKSRC's and FRH2O's PARAMETER HLICE = 3.3350E5). Numerically equal to par.lsubf; the module declares the same constant twice under two names."
},
"snow_c1": {
"type": "parameter",
"units": "1/(cm*h)",
"default": 0.01,
"description": "SNOWPACK's C1, the fractional increase in snow density per centimetre of overlying water equivalent per hour, in Koren's approximate solution of E. Anderson's compaction equation (3.29), NOAA Technical Report NWS 19. WRF: SUBROUTINE SNOWPACK, PARAMETER C1 = 0.01. The routine works in its own 'simulation units' of centimetres and hours, and this constant carries them."
},
"snow_c2": {
"type": "parameter",
"units": "1",
"default": 21.0,
"description": "SNOWPACK's C2, Kojima's density coefficient in the compaction exponent exp(0.08 tavgc - c2 sndens). WRF: PARAMETER C2 = 21.0, and its comment calls it 'a constant (cm3/g) Kojima estimated as 21 cms/g'. Declared dimensionless here because the density it multiplies is carried as the dimensionless fraction of the density of water (WRF's own comment on SNDENS: 'G/CM3=DIMENSIONLESS FRACTION OF H2O DENSITY'), which is numerically the density in g/cm^3; the product is dimensionless either way."
},
"snow_ctemp": {
"type": "parameter",
"units": "1/K",
"default": 0.08,
"description": "The temperature coefficient of the compaction exponent, WRF's in-line 0.08 in EXP(0.08*TAVGC - C2*SNDENS). TAVGC is a Celsius temperature, i.e. a temperature measured from the freezing point, and a difference of one degree Celsius is a difference of one kelvin, so the coefficient is per kelvin."
},
"snow_dwrate": {
"type": "parameter",
"units": "1/day",
"default": 0.13,
"description": "SNOWPACK's melt-water retention rate: 13 % of the liquid water can be stored in the pack per DAY during snowmelt, until the density reaches 0.40. WRF's in-line 0.13 in DW = 0.13*DTHR/24."
},
"snow_dens_max": {
"type": "parameter",
"units": "1",
"default": 0.4,
"description": "Upper limit SNOWPACK imposes on the snow density, as a fraction of the density of water. WRF applies it twice: to the compacted density DSX, and again to the density after melt-water retention."
},
"snow_dens_min": {
"type": "parameter",
"units": "1",
"default": 0.05,
"description": "Lower limit SNOWPACK imposes on the compacted snow density, as a fraction of the density of water. WRF: IF (DSX < 0.05) DSX = 0.05."
},
"snow_esdc_min": {
"type": "parameter",
"units": "cm",
"default": 0.01,
"description": "Floor SNOWPACK puts under the water equivalent BEFORE forming the compaction argument, WRF's ESDCX: IF (ESDC > 1.E-2) THEN ESDCX = ESDC ELSE ESDCX = 1.E-2. It bounds the overburden a vanishing pack can feel, and it does NOT apply to the depth diagnostic at the end, which uses the unfloored ESDC."
},
"snow_new_dens": {
"type": "parameter",
"units": "1",
"default": 0.05,
"description": "Density of freshly fallen snow at or below snow_new_tcold, as a fraction of the density of water. WRF: SUBROUTINE SNOW_NEW's in-line 0.05, the constant term of Gottlib's (1980) fresh-snow density fit. Numerically equal to snow_dens_min, the floor SNOWPACK puts under the COMPACTED density, but a different quantity: this one is where new snow starts, that one is where compaction may not take it."
},
"snow_new_coef": {
"type": "parameter",
"units": "1/K^1.5",
"default": 0.0017,
"description": "Coefficient of Gottlib's (1980) fresh-snow density fit, dsnew = snow_new_dens + snow_new_coef (tempc - snow_new_tcold)^1.5: warmer snow falls denser. WRF's in-line 0.0017. Its units are fixed by the exponent, since the temperature excess it multiplies is raised to the 3/2 power and the result is a density fraction."
},
"snow_new_tcold": {
"type": "parameter",
"units": "K",
"default": -15.0,
"description": "Temperature below which Gottlib's fit is cut off and fresh snow takes its minimum density, measured from the freezing point (WRF's -15. against TEMPC = TEMP - 273.15). Below it the fit's 3/2 power would take the density below its floor and, for a negative argument, out of the reals."
},
"snow_new_hmin": {
"type": "parameter",
"units": "cm",
"default": 0.001,
"description": "Depth below which SNOW_NEW abandons the depth-weighted density average and takes max(dsnew, sndens) instead, WRF's 1.0E-3 in IF (SNOWHC + HNEWC .LT. 1.0E-3). It guards the average against a vanishing denominator when both the old pack and the new snowfall are negligible."
},
"snow_z0": {
"type": "parameter",
"units": "m",
"default": 0.001,
"description": "Aerodynamic roughness length of a snow surface, WRF's PARAMETER Z0S in SUBROUTINE SNOWZ0. It is the roughness the snow-covered fraction contributes once the vegetation beneath is fully buried."
},
"snow_z0_burial_factor": {
"type": "parameter",
"units": "1",
"default": 7.0,
"description": "How many roughness lengths of snow it takes to bury the vegetation, WRF's 7.0 in BURIAL = 7.0 Z0BRD - SNOWH. Roughness elements are treated as 7 z0brd tall, so the snow-covered roughness falls linearly from z0brd towards the snow value as the pack approaches that height."
},
"snow_z0_burial_min": {
"type": "parameter",
"units": "m",
"default": 0.0007,
"description": "Remaining exposed height below which SNOWZ0 stops interpolating and takes the bare snow roughness, WRF's 0.0007 in IF (BURIAL.LE.0.0007). Divided by snow_z0_burial_factor it is 1e-4 m, a tenth of snow_z0, so the linear branch is abandoned well before it would undercut the snow surface's own roughness."
}
},
"equations": [],
"tests": []
}